An extremely flexible co-extruded PVC sweep seal that fits into a saw kerf groove cut into the frame or door. It holds tight radii and compound curves when bent a round a frame. It resists UV, ozone, mildew and colour change. Note: for noise, specify two rows of seal. Location Around sliding doors or door frames and pivot doors. Min/Max Gap 6mm to 8mm. Seal lengths 1000mm increments to 200 metre (coil). Fixing Method 2.5mm x 6mm deep kerf groove, push in locking fit. Seal Material Rigid and flexible PVC co-extrusion, brown. Used in conjunction Raven Nylon brush strip door bottom seals. Approvals Acoustic UK/EU: Conforms to Approved Document E. Tested to BS EN ISO140.3 (similar to BS EN ISO 717.1, BS 2750, BS 5821). AUS/NZ: Conforms to BCA Sec. F5.5. Tests above are similar to AS 1191, AS 1045, AS/NZS 1276.