A medium temperature smoke door frame seal. It is an acoustically designed smoke seal for installation on door stops and it can be mitred or butt jointed. Its aluminium carrier is sturdy and slotted for adjustment with concealed fixings. It is quick and easy to install around the jamb and head and can be fitted without removing the door. Location Head and jambs on single or double butt hinged doors. Min/Max Gap 0mm to 6mm. Seal Sizes Available in stock lengths or door set sizes. Standard Finish Aluminium anodised 15 microns Satin Clear (silver), Bronze finish. PE Paint (extra cost). Is a two pack polyester enamel colour match finish which is equal to or exceeds powdercoat finish. Fixing Method Zinc plated, cross recess head S.T. screws of the appropriate size are supplied. Seal Material Silicon Rubber (SE) (Grey). Replacement Seal RP394Si. Used in conjunction RP8Si, RP16Si, RP38Si, RP99Si, RP70Si. Approvals Acoustic AUS/NZ: Conforms to BCA Sec. F5. 5.Tested to AS 1191, AS 1045,AS/NZS 1276. UK/EU: Conforms to Approved Document E.Tested to BS EN ISO140.3 (similar to BS EN ISO 717.1, BS 2750, BS 5821). Fire & Smoke AUS/NZ: Conforms to BCA Spec. C3.4. Tested to AS 1530.4, AS/NZS 1905.1 & AS/NZS 1530.7. UK/EU: Conforms to Approved Document B. Tested to ISO CD 5925-1 (similar to BS EN 1634.1, BS 476 Part 20 & 22, Sec. 31.1).