 
    
RP92Si is a heavy duty automatic door bottom seal, which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. RP92Si is designed for broad butt hinged doors with large gaps and can accommodate ramped floors/sills with gradients up to 1:5. Particularly suitable for wheelchair access ramps where large clearances are necessary under inward opening doors. Larger gaps can be accommodated if set lower on the door bottom and smaller gaps if set higher on the door bottom (user determined).
Location Timber or aluminium single and double broad butt hinged doors.
Min/Max action sealing gap is 25mm to 55mm.
Seal Sizes 1200mm, 1070mm, 920mm, 820 to 600mm (min). Seal cuts back to exact size.
Standard FinishAluminium Anodised 15 microns. Satin Clear (silver) outer. Black anodised inner.
Fixing Method Zinc plated, cross recess head S.T. screws of the appropriate size and colour are supplied. Escutcheon plates and self adhesive striker plate (25mm x25mm) included.
Seal MaterialSilicon Rubber (SE) (Charcoal)
Replacement Seal RP347Si.
Adjustment Has set screw for sealing action adjustment.
Approvals
Access & Mobility
AUS/NZ: Conforms to BCA D3, D3.2.
UK/EU: Conforms to Approved Document M.
Durability tested to over 1,000,000 operating cycles without failure. | | Click the image to activate when page download complete.
|