 
      
A face mounted automatic door bottom seal which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. It is operated automatically by pressure against the door jamb on its adjusting screw, and it incorporates concealed fixings.
Location Single or double butt hinged doors.
Min/Max Gap 3mm/15mm.
Seal Sizes 915mm unit (between door stops) unit cuts back to 450mm (minimum).
Standard Finish
Aluminium anodised 15 microns Satin Clear (silver), Bronze finish or Bright Gold finish.
Fixing Method Zinc plated, cross recess head S.T.screws of the appropriate size are supplied. Fixing holes are slotted with push in cover strip.
Seal Material TPR (black).
Replacement Seal RP460
Used in conjunction Threshold plates RP13,
RP82, frame seals.
Adjustment Has screw for seal action adjustment. Self levelling.
Approvals
Fire AUS/NZ: Tested to AS 1530.4 &AS/NZS 1905.1.
UK/EU: Tests above are similar to BS EN 1634.1, BS 476 Part 20 & 22.
Durability tested to over 500,000 operating cycles without failure. | | Click the image to activate when page
download complete
|