 
      
RP99Si is a heavy duty automatic door bottom seal which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. An acoustically designed seal for face mounted, semi-mortised or fully mortised applications. It is operated automatically by pressure against the door jamb on its adjustment block. RP99Si seals when the door closes and retracts automatically when the door is opened.
Location Solid core single and double broad butt hinged doors. For fully and semi-mortised applications minimum door thickness 40mm recommended.
Min/Max Gap 1mm/19mm
Seal Sizes 1220mm, 1070mm, 920mm, 820mm, 720mm, 600mm, 380mm to 295mm (min). Seal cuts back for exact size.
Standard Finish Aluminium Anodised 15 microns. Satin Clear (silver) or Bronze finish.
P.E. Paint (extra cost). Is a two pack polyester enamel colour match finish which is equal to or exceeds powdercoat finish.
Note: Face mount aluminium angle and all escutcheon plates included.
Seal Material Silicon Rubber (SE) (charcoal colour)
Replacement Seal RP347Si
Approvals
Acoustic AUS/NZ: Conforms to BCA Sec. F5.5. Tested to AS 1191, AS 1045, AS/NZS 1276.
UK/EU: Conforms to Approved document E. Tested to BS EN ISO140.3 (similar to BS EN ISO 717.1, BS 2750, BS 5821)
Fire & Smoke AUS/NZ: Conforms to BCA Spec. C3.4. Tested to AS 1530.4, AS/NZS 1905.1 & AS/NZS 1530.7.
UK/EU: Conforms to Approved Document B. Tested to ISO CD 5925-1 (similar to BS EN 1634.1, BS 476 Part 20 & 22, Sec. 31.1).
Durability tested to over 1,000,000 operating cycles without failure.
| | Click the image to activate when page
download complete
|