 
      
A neat, aluminium door stop frame seal which has proven to be an effective acoustic smoke seal. RP10Si is quick and easy to install onto the door frame as a door stop. Adjustable, by large concealed fixing slots for a precision fit. RP10Si has a tamper resistant, rigid PVC cover strip (Self Extinguishing)
This superior multi-finned seal design considerably reduces the leakage of noise, smoke and energy through air movement around the edges of a door. The minimum deflection of the five sealing fins creates maximum efficiency, offering a large tolerance to door movement over time. The RP10Si can be mitred or butt jointed to give an integrated aesthetic appearance.
Note: if fixing to rebated frames of single doors, specify a long backset door latch.
Location Head and jambs of single or double broad butt hinged doors.
Min/Max Gap 0mm/10mm.
Seal Sizes Available in door set sizes.
Standard Finish Aluminium anodised 15 microns. Satin Clear (silver) finish, PE Paint (extra cost). Is a two pack polyester enamel colour match finish which is equal to or exceeds powdercoat finish.
Rigid PVC cover strip (SE) (Light Grey)
Fixing Method Zinc plated, cross recess head S.T. screws of the appropriate size are supplied. Fixing holes are pre-drilled and are slotted to allow the seals to be fitted accurately and to allow adjustments to be made for building movement.
Seal Material Silicon Rubber (SE) (Light Grey).
Replacement Seal RP310Si.
Used in conjunction Raven Door Bottom Seal, Astragals and Thresholds.
Approvals
Fire & Smoke AUS/NZ: Conforms to BCA Spec. C3.4. Tested to AS 1530.4, AS/NZS 1905.1 & AS/NZS 1530.7.
UK/EU: Conforms to Approved Document B. Tested to ISO CD 5925-1 (similar to BS EN 1634.1, BS 476 Part 20 & 22, Sec. 31.1).
Acoustic Refer to RP10.
| | Silicon and Cover-strip also available in Charcoal (Dark Grey): Click here 
|