A flexible PVC cased Intumescent fire seal for fire resisting doors and door frames.The seal is supplied coiled in a continuous length to minimise wastage when cutting to exact size. RP1004F can be set into a morticed groove or retro-fitted to upgrade perimeter door frame margins that exceed the 3mm gap compliance (refer local standards). An aggressive self adhesive backing tape is standard. Seal Size 150m coil. Location Morticed into the door or frame stiles and head. Fixing Method Self adhesive. Note: Contact surface must be clean, smooth and if painted, well cured. Seal Material Intumescent infill with flexible PVC holder. Standard Finish PVC Brown or White. Used in conjunction Raven Si rated door bottom smoke seals, or Raven nylon brush strip seals for pivot doors. Approvals Fire & Smoke AUS/NZ: Conforms to BCA Spec. C3.4. Tested to AS 1530.4 & AS/NZS 1905.1. FRL30 UK/EU: Conforms to Approved Document B. Tested to BS EN 1634.1, BS 476 Part 20 & 22.		Standard colours are White and Brown, other colours, lengths and finishes available to special order.