 
     
A neat, anodised aluminium door stop frame seal which has proven to be an effective acoustic seal. RP10 is quick and easy to install onto the door frame as a door stop. Adjustable, by large concealed fixing slots for a precision fit. RP10 has a tamper resistant, rigid pvc cover strip (Self Extinguishing)
This superior multi-finned sealing design considerably reduces the leakage of noise and energy through air movement around the edges of a door. The minimum deflection of the five sealing fins creates maximum efficiency, offering a large tolerance to door movement over time. The RP10 can be mitred or butt jointed.
Features
- Superior multi-finned acoustic gasket
- Tamper resistant, rigid cover strip for fixings
- Sturdy anodised aluminium carrier
- Mitre or Butt joint fitment
Note: if fixing to rebated frames of single doors, specify a long backset door latch.
Location Head and jambs of single or double broad butt hinged doors.
Min/Max Gap 0mm/10mm.
Seal Sizes Available in stock lengths or door set sizes.
Standard Finish Aluminium anodised 15 microns. Satin Clear (Silver) or Bronze finish. P.E. Paint (extra cost). Is a two pack polyester enamel colour match finish which is equal to or exceeds powdercoat finish.
Rigid PVC cover strip (SE) (Charcoal)
Fixing Method Zinc plated, cross recess head S.T. and self drilling screws of the appropriate size are supplied.
Large fixing slots allow accurate fitment for optimum sealing performance and
Seal Material UV stabilised, flexible PVC (SE) Charcoal or light grey
Replacement Seal RP410
Used in conjunction Raven Door Bottom Seal, Astragals and Thresholds.
Note: If ordering RP10 with silicon option specify RP10Si.
Approvals
Acoustic AUS/NZ: Conforms to BCA Sec. F5.5. Tested to AS 1191, AS 1045, AS/NZS 1276.
UK/EU: Conforms to Approved Document E. Tested to BS EN ISO140.3 (similar to BS EN ISO 717.1, BS 2750, BS 5821). | | 
|